Motorcycle - Gear Oils
Scoogear 75W90
view bottle

Packing: 110 mL

Scoogear 75W90

Scoogear is a SAE 75W-90, synthetic Extreme Pressure (EP) transmission fluid, formulated for use in performance scooter applications from a complex combination of synthetic base stocks.

Features

  • Meets the performance demands of scooter gearbox applications operating under extreme conditions of both temperature and load
  • Unique synthetic composition demonstrates outstanding performance
  • Excellent low temperature fluidity without affecting the severe operating capability at high temperature and speed
  • High performance anti-wear and load carrying additive systems proven in the latest scooter transmission systems

Scoogear oil meets or exceeds the following specifications:

API GL-5

Typical Physical Characteristics

Viscosity Grade SAE 75W-90
Density @ 15C 0.874
Viscosity @ 40C 97.1 cSt
Viscosity @ 100C 14.0 cSt
Viscosity Index 148
Appearance Clear Pale Amber Liquid

GRO
view bottle

Packing: 1 L

GRO
(Gearbox Racing Oil)

GRO is a synthetic, advanced formulation, motorcycle gearbox oil covering the 10W-40 or
75W-90 viscosity range.

Designed to reduce friction and protect over a wide temperature range, GRO can operate from as low as -30C through to the heat of racing whilst affording maximum anti wear protection.

Features
  • The following features make GRO an ideal choice for modern compact high power, high load multi speed gearbox applications.

    • Low viscosity
    • Excellent thermal stability
    • Superior resistance to oxidation

Typical Physical Characteristics

Viscosity Grade SAE 10W-40, SAE 75W-90
Density @15C 0.873
Viscosity @ 40C 96.5 cSt
Viscosity @ 100C 14.0 cSt
Viscosity Index 148
Gearaxl 75w90
view bottle

Packing: 1 L

Gearaxl 75W90
(Semi-synthetic)

High performance driveline lubricants for gearboxes and axles

Applications

Automotive Transmissions- Heavily loaded axle drives, synchronised and non-synchronised gearboxes.

Universal Driveline- Designed to meet the requirements of both axles and gearboxes and can be used as a 'universal' driveline lubricant in heavy duty and passenger car vehicles.

Features
  • Improved fuel economy over conventional gear oils
  • Excellent wear protection even in the most severe environments allowing for prolonged component life and extended drain capability
  • Smoother transmission operation provided by outstanding low temperature fluidity resulting in improved gear changes from cold (compared to SAE 80W & 90 grades)
  • Compatible with conventional mineral and synthetic based gear lubricants and with seal materials used in automotive applications
  • 'Cold shift' and 'hot rattle' problems overcome in passenger car and van 5-speed gearboxes

The Gearaxl Range meets or exceeds the following specifications:

API GL-4 & GL-5
ZF TE-ML 02 / 05

Note
The selection of the correct viscosity grade is vital; therefore we recommend that the drivers handbook be consulted.

Typical Physical Characteristics

Viscosity Grade SAE 75W-90
Density @ 15C 0.875
Viscosity @ 40C 105.0 cSt
Viscosity @ 100C 14.0 cSt
Viscosity Index 135
Appearance Clear Amber Liquid


SD 85W140
view bottle

Packing: 1 L

SD 85W140
(Synthetic Fortified)

The SD Gear Oil is high performance axle lubricants developed using high quality raw materials. They are intended for moderate to highly loaded gears and axles found in a wide range of on-road and offroad driveline applications where API GL-5 performance is required.

Features

The technology employed within SD Gear Oil is suitable for use in a very wide range of vehicle applications.

Long life additives and high quality base oil ensure long-term protection of gear components allowing extended drain capability.

High performance extreme pressure additive chemistry provides outstanding resistance to pitting, scoring and wear.

SD Gear Oil are also suitable for use in general gear sets such as those found in ancillary equipment and some industrial equipment.

Performance Specifications / Approvals:

API GL-5
VOLVO 1273.10
MAN 342 M1 & M2 (MAN 342N)
MB 235.0, MB 235.6
MIL-L-2105D
ZF TE-ML 05A, 07A, 12E, 16B, C & D, 17B, 19B, 21A

NOTE

The selection of the correct viscosity grade is vital; therefore we recommend that the vehicle handbook be consulted.

Typical Physical Characteristics

SAE Viscosity Grade 85W-140
Density @ 15C 0.904
Viscosity @ 40C 441.5 cSt
Viscosity @ 100C 30.2 cSt
Viscosity Index 97
Appearance Amber