Bicycle - Cleaning and Polishing
dirt blaster
view bottle

Packing: 1 L

Dirt Blaster

Rock Oil's Dirt Blaster is a high performance, biodegradable, detergent package suitable for most cleaning applications where the removal of dirt, oils and greases is required. Dirt Blaster is safe to use on most delicate materials but when cleaning polished alloys the product should not be allowed to dry.

Features
  • Caustic soda free and suitable for use with most motorcycle components
  • Advanced, biodegradable formulation boosts cleaning properties in hard water areas and also reduces scale build up when used through pressure washers
  • Outstanding performance under normal conditions with minimal agitation
  • The product is not classified as hazardous under current legislation although contact with eyes, as with any detergent, should be avoided

Instructions For Use:

It is recommended that Dirt Blaster is used straight from the bottle

Spray onto the surface to be cleaned, slight agitation with a soft brush may be required for heavy soiling Rinse thoroughly with clean water, leathering is not normally required

This versatile cleaner may also be applied through hot or cold water pressure washer systems and diluted with up to 100 parts water

Important Note:

Dirt Blaster is suitable for use with most materials used in the construction of motorcycles, including paintwork, alloys and composites. However due to continual development of these materials it is strongly recommended that the product is spot tested the first time it is used.

Typical Physical Characteristics

Density @ 15C 1.030 kg/L
pH value 11.0
Appearance Clear Green Liquid

NON SILICONE
BIKE WAX

Packing: 1 L

Non Silicone Bike Wax

Bike Wax is a silicone free polish spray designed to give instant and lasting protection, as well as a shine on all painted surfaces. It is suitable for use on all aluminium, carbon, titanium and painted surfaces on all types of motorcycles.

Bike Wax can also be used on helmets, engines, panels, fairings and leather. Shake can well before use.

Spray on evenly and bring to a shine with a lint free cloth.

Features
  • Specially developed to give instant and lasting protection, as well as a shine, to all motorcycle components and motorcycle related accessories.
  • Non silicone formulation is very useful in racing and fast road applications where non slippery components such as controls and certain parts of the motorcycle are desired.
  • It improves and conditions fairings, engines, panels, leather and helmets.
  • It may be sprayed on all surfaces to give a protective coating and helps keep the engine and components
  • free from dirt.
BRAKE KLEEN
view bottle

Packing: 1 L

Brake Kleen

A highly efficient general purpose cleaning solvent designed to replace 1.1.1.trichloroethane.

Features
  • Ideal for the efficient and speedy cleaning of all brake parts
  • Low toxicity
  • Leaves no residue and does not cause corrosion on metals
  • Safe to use on most plastics or fibres (it is advisable to test a small sample first)
  • Evaporates quickly
  • Also suitable for cleaning most electrical apparatus, installations and delicate instruments

Directions For Use

Brake Kleen may be used as a 'dip' type cleaner or as supplied from Aerosol. The product will evaporate rapidly. Any excess should be wiped off where necessary.

Caution

Unlike 1.1.1. Trichloroethane this product contains a high level of flammable materials.

FRAME JUICE
view bottle

Packing: 400 mL

Frame Juice

You know how annoying it is to look at your cleaned and gleaming wet bike and feel all proud of your hard work, only to turn round 5 minutes later when its dried off, to be confronted with the same cack stained bike that was there an hour ago, just minus the clods of mud? Well, be frustrated no more as Juice Lubes buffing marvellous Frame Juice will sort this little problem out in no time.

The Frame Juice formula not only restores your pride and joy to its box fresh shine, it also leaves a non stick surface that mud finds it a lot harder to stick to. This mean that next time round cleaning should be even quicker and easier. Who doesn’t like the sound of that?!

Directions:

After cleaning your frame with Dirt Juice and rinsing with fresh water, allow frame to dry.

Then, spray directly on to the area you want shiny again (TAKE CARE TO AVOID CONTACT WITH ANY BRAKING SURFACES).

Finally, buff with a clean rag to your level of satisfaction.

If you are embarking a on a muddy ride, spray on and do not wipe off. This will maximise the mud shedding abilities, which by the end of a long ride or race can save a you a fair bit in weight that you may well have ended up carrying around with you.

https://www.youtube.com/watch?v=G0grOeSdx5U