Motorcycle - Coolant
Iced Kool
view bottle

Packing: 1L

Iced Kool

Iced Kool is a high performance, ready to use engine coolant which helps engines run cooler in arduous racing conditions, protects multi-metal cooling systems and provides freeze protection down to-34°C .

Iced Kool should only be used as a complete engine coolant, not further diluted.

Features
  • Outstanding heat transfer properties for reduced operating temperatures in racing applications.
  • Utilises OAT inhibitor technology and is free from nitrites, amines, phosphates, borates and silicates
  • Excellent compatibility with seals and water pump materials
  • Low toxicity, environmentally non hazardous and biodegradable
  • Unlike traditional coolants which employ inorganic inhibitors, Iced Kool has excellent stability and very low inhibitor depletion rates
  • Iced Kool is compatible with most other ethylene glycol and propylene glycol based coolants but for optimum performance and durability we recommend that prior to using Iced Kool in systems previously filled with traditional coolant that the cooling system is drained and flushed with clean water.
  • Gives total protection from -34C to normal operating temperatures

 

Iced Kool exceeds the requirements of most European and International Standards including:

ASTM D3306 TYPE II
ASTM D5216, BS 6580 (1992)
AFNOR NF R15-601 (except reserve alkalinity)

Typical Physical Characteristics

Density @ 15°C 1.020
Freezing Point -34°C
Appearance Clear Blue liquid

Kool hc
view bottle

Packing: 1L

Kool HC

Kool HC is an ethylene glycol based ready to use engine coolant which employs Organic Acid Inhibitor Technology. It is a pre-diluted (with de-ionised water) product and should only be used as a complete engine coolant

Features
  • Free from nitrites, amines, phosphates, borates and silicates
  • Unlike traditional coolants which employ inorganic inhibitors, Kool HC has excellent stability and very low inhibitor depletion rates
  • Compatible with most other ethylene glycol based coolants but for optimum performance and durability we recommend that prior to using Kool HC in systems previously filled with traditional coolant that the cooling system is drained and flushed with clean water before filling with Kool HC
  • Gives total protection from -17C to normal operating temperatures
Performance Specifications / Approvals:

ASTM D3306
ASTM D4985
BS 6580 (1992)
SAE J1034
FFV Heft R443
CUNA NC 956-16.UNE 26361-88
JIS K2234
NATO S759
AFNOR NF R15-601 (except for reserve alkalinity)

Important: Please follow equipment manufacturer recommendations regarding drain intervals.

Typical Physical Characteristics


Density @ 15°C 1.040
pH 8.2
Freezing Point -17°C
Appearance Clear red / orange liquid